In the document feeder
Using the automatic document feeder (ADF), you can load up to 100 sheets of paper (80 g/m2, 21 lbs bond) for
one job.
1. Flex or fan the edge of the paper stack to separate
the pages before loading originals.
2. Load the original face up into the document feeder
input tray. Make sure that the bottom of the
original stack matches the paper size marked on
the document input tray.
3. Adjust the document feeder width guides to the
paper size.
NOTE: Dust on the document feeder glass may cause black lines on the printout. Always keep the glass clean.
36 Chapter 3 Media and Tray ENWW
To Next Page
Loading...