Preprinted paper
When loading preprinted paper, the printed side should be facing up with an uncurled edge at the front. If you
experience problems with paper feeding, turn the paper around. Note that print quality is not guaranteed.
●
Must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when
subjected to the machine’s fusing temperature for 0.1 second (about 170°C (338°F)).
●
Preprinted paper ink must be non-ammable and should not adversely aect machine rollers.
●
Before you load preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink
can come o preprinted paper, reducing print quality.
ENWW Printing on special media 31
To Next Page
Loading...