CLI commands
use nat one-to-one
Use this attribute.
no use nat one-to-one
Do not use this attribute.
session profile
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
session profile <name>
Change this profile’s name.
smtp redirection setup
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
smtp redirection setup <hostname>[:<port>t][,<username>,<password>]
Sets basic SMTP redirection info: hostname[:port][,username,password].
no smtp redirection setup
Clears basic SMTP redirection info.
use smtp redirection setup
Use SMTP redirection.
no use smtp redirection setup
Do not use SMTP redirection.
Parameters
<hostname> Specify the IP address or domain name of the e-mail server. Maximum
length is 253 characters.
<port> Specify the port on the e-mail server to relay to. Range: 1 to 65535. Default:
25
<username> Specify the username required to log on to the SMTP server. Maximum 32
characters.
<password> Specify the password required to log on to the SMTP server. Maximum 32
characters.
Description
Sets the default SMTP server address for all user sessions. This attribute is used if a specific
server is not set for a particular user.
termination action
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
termination action (logout | reauthenticate)
Set the termination action.
use termination action
Use the termination action.
no use termination action
Do not use the termination action.
2-68
To Next Page
Loading...
Need help?
General
