HP MSM7XX

CLI commands
no dns server
Resets the DNS server for this policy.
incoming nat
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
incoming nat
Enables NAT for incoming traffic.
no incoming nat
Disables NAT for incoming traffic.
incoming traffic network
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
incoming traffic network <ip address>/<mask>
Sets the Phase 2 incoming network.
interface
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
interface (lan | internet)
Sets the interface this policy applies to.
local id
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
local id (ip-address <ip address> | host <name> | email <address> | dn <dn>)
Specify the local id type and value.
mode
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
mode (main | aggressive) (tunnel | transport)
Sets the IPSec mode.
outgoing traffic network
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
outgoing traffic network <ip address>/<mask>
Sets the Phase 2 outgoing network.
peer id
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
peer id (ip-address <ip address> | host <name> | email <address> | dn <dn>)
Specify the peer id type and value.
2-113