CLI commands
Active Directory Group context
Path: View > Enable > Config > Active Directory Group
Contains information about attributes to send when a user is related to an Active Directory group.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
access controlled
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
access controlled
Make this user access controlled.
no access controlled
Make this user not access controlled.
access-controlled profile
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
access-controlled profile <name>
Use this session profile for this account.
no access-controlled profile <name>
Do not use this session profile for this account.
use access-controlled profile
Use the Access Controlled profiles.
no use access-controlled profile
Do not use the Access Controlled profiles.
access-controlled virtual ap
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
access-controlled virtual ap <name>
Add to the list of allowed virtual APs.
no access-controlled virtual ap <name>
Remove from the list of allowed virtual APs.
use access-controlled virtual ap
Use only allowed Virtual APs (VSCs) for this profile.
no use access-controlled virtual ap
Use any Virtual APs (VSCs) for this profile.
2-127
To Next Page
Loading...
Need help?
General
