CLI commands
clock auto adjust dst
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
clock auto adjust dst
Automatically adjust clock for daylight savings changes.
no clock auto adjust dst
Do not automatically adjust clock for daylight savings changes.
clock timezone
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
clock timezone <gmtdiff>
Sets the time zone the service controller is operating in.
Parameters
<gmtdiff> Offset from GMT as follows: +-HOUR:MIN. For example, Eastern Standard
time is -5:00.
clock use custom dst rules
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
clock use custom dst rules
Use custom DST rules instead of default ones.
no clock use custom dst rules
Do not use custom DST rules, use default ones.
ntp protocol
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ntp protocol (ntp | sntp)
Sets the network time protocol to use.
ntp server
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ntp server
Enable this option to have the service controller periodically contact a network time server to
update its internal clock.
no ntp server
Disables the use of a network time server.
clock custom dst begins
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
clock custom dst begins <day> <weekday> <month> <time>
Set parameters of the rule defining the beginning of daylight savings time.
2-19
To Next Page
Loading...
Need help?
General
