CLI commands
Parameters
<time> Time as hh:mm:ss. For example: 15:44:00.
config-update uri
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update uri <uri>
Sets the URI where the service controller will download or upload the configuration file.
no config-update uri
Clears the configuration file URI.
config-update weekday
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update weekday (everyday | monday | tuesday | wednesday | thursday |
friday | saturday | sunday)
Sets the day when the scheduled configuration operation (backup or restore) will take place.
snmp-server trap config-change
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap config-change
Send a trap whenever the configuration is changed.
no snmp-server trap config-change
Do not send this trap.
snmp-server trap config-update
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap config-update
Send a trap whenever the firmware is updated.
no snmp-server trap config-update
Do not send this trap.
logging destination
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
logging destination <name>
Creates a new remote destination for syslog.
no logging destination <name>
Deletes the specified syslog destination.
Parameters
<name> Name of syslog destination. Use the name "local" to edit your local log file
settings. Any other name will edit/create a remote log destination.
2-22
To Next Page
Loading...
Need help?
General
