HP MSM7XX

CLI commands
arping
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
arping [ -AbDfhqUV] [ -c <count>] [ -w <deadline>] [ -s <source>] -I <interface>
<destination>
Pings a destination on a device interface using ARP packets.
arp
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
arp [-evn] [-H <type>] [-i if] ?- [<hostname>] arp [-v] [-i if] -d <hostname>
[pub] arp [-v] [-H <type>] [-i if] -s <hostname> <hw_addr> [temp] arp [-v] [-H
<type>] [-i if] -s <hostname> <hw_addr> [<netmask> <nm>] <pub> arp [-v] [-H
<type>] [-i if] -Ds <hostname> ifa [<netmask> <nm>] <pub>
Displays and modifies the Internet-to-Ethernet address translation tables used by the address
resolution protocol.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
quit
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
quit
Exit the enable context.
rcapture
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
rcapture [<a>] [<b>] [<c>] [<d>] [<e>] [<f>] [<g>] [<h>]
Sends port capture to an FTP server.
Refer to Linux documentation for a complete description of this command and its options.
show arp
Supported on: MSM710 MSM730
show arp
Show the ARP table.
MSM750 MSM760 MSM765zl
show bridge
Supported on: MSM710 MSM730
show bridge
Show bridge information.
MSM750 MSM760 MSM765zl
2-5