CLI commands
Local mesh provisioning profile context
Path: View > Enable > Controlled Network AP > Controlled Network > Local mesh provisioning profile
View > Enable > Controlled Network AP Group > Controlled Network > Local mesh provisioning
profile
View > Enable > Controlled Network Base Group > Controlled Network > Local mesh provisioning
profile
Configuration for local mesh provisioning profile.
accept connection
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
accept connection
Enable this group to act as alternate master.
no accept connection
Prevent this group from acting as alternate master.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switch to parent context.
inherit
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
inherit
Inherit settings from parent.
no inherit
Do not inherit settings from parent.
multiple radio
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
multiple radio
On multiple radio products, use all available radios.
no multiple radio
On multiple radio products, do not use all available radios.
2-159
To Next Page
Loading...
Need help?
General
