HP MSM7XX

CLI commands
no radio active
Disables the radio.
spectralink view
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
spectralink view
Enable the use of spectralink view.
no spectralink view
Disable the use of spectralink view.
dot11n guard interval
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot11n guard interval (short | long)
Select the 802.11n guard interval.
dot11n channel width
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot11n channel width (40 | 20 | auto)
Select the 802.11n channel width.
dot11n channel extension
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot11n channel extension (above | below)
Select the 802.11n channel extension. Applicable only in the 2.4 GHz band with a 40 MHz channel
width.
dot11n multicast rate
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot11n multicast rate <rate>
Set the multicast rate for use with 802.11n networks.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switch to parent context.
inherit
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
inherit
Inherit settings from parent.
2-153