CLI commands
show user profiles
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
show user profiles [<pattern>]
Display current local users.
show user profiles details
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
show user profiles details <name>
Display detailed information about one user.
user profile
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
user profile <name>
Adds or edits the specified username in the local user list.
no user profile <name>
Removes the specified username from the local user list.
renew user profile subscription
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
renew user profile subscription [<username>]
Renew a user with its subscription plan.
dot1x reauth
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot1x reauth
Enable this option to force 802.1X client stations to reauthenticate.
no dot1x reauth
Disables 802.1X reauthentication.
dot1x reauth period
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot1x reauth period (15m | 30m | 1h | 2h | 4h | 8h | 12h)
Sets the 802.1X reauthentication interval. Client stations must reauthenticate when this interval
expires.
dot1x reauth terminate
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot1x reauth terminate
Enable this option to allow client stations to remain connected during re-authentication. Client
traffic is blocked only when re-authentication fails.
2-42
To Next Page
Loading...
Need help?
General
