HP MSM7XX Reference Guide

CLI commands
 If there are any firewalls between the service controller and the RF Manager Server, then TCP
and UDP ports 3851 must be open bidirectionally.
 If using the hostname option, an entry must be created on the network DNS server that points
to the IP address of the RF Manager Server.
 If using the Server ID option, support for multicast traffic must be enabled on all routers and
switches connected between the service controller and the RF Manager Server.
sensor network detector
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
sensor network detector
Enable the Network Detector.
no sensor network detector
Disable the Network Detector.
inherit sensor
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
inherit sensor
Inherit sensor settings from parent.
no inherit sensor
Do not inherit sensor settings from parent.
dynamic key
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dynamic key
Enables dynamic key support for 802.1X and WPA.
no dynamic key
Disables dynamic key support for 802.1X and WPA.
dynamic key interval
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dynamic key interval (5m | 10m | 15m | 30m | 1h | 2h | 4h | 8h | 12h)
Specifies how often (in minutes or hours) that the group (broadcast) key is changed for 802.1X
and WPA.
dot1x reauth
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot1x reauth
Enable this option to force 802.1X client stations to reauthenticate.
no dot1x reauth
Disables 802.1X reauthentication.
2-136

HP MSM7XX Specifications

General

Brand	HP
Model	MSM7XX
Category	Controller
Language	English