CLI commands
snmp-server trap web-login
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap web-login
Send a trap each time an administrator login is accepted.
no snmp-server trap web-login
Do not send a trap each time an administrator login is accepted.
snmp-server trap web-logout
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
snmp-server trap web-logout
Send a trap each time an administrator logs out.
no snmp-server trap web-logout
Do not send a trap each time an administrator logs out.
web admin kickout
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
web admin kickout
Enables a new administrator login to terminate an existing administrator session.
no web admin kickout
Stops a new administrator from logging in until an existing administrator logs out.
web allow
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
web allow <ip address>/<mask>
Adds an address to the list of hosts that can access the management tool.
no web allow <ip address>/<mask>
Removes the specified address from the list of hosts that can access the management tool.
Parameters
<address> IP address.
</mask> Subnet mask in CIDR format. Specifies the number of bits in the mask.
world-mode dot11 country code
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
world-mode dot11 country code <code>
Specifies the country the service controller is operating in.
Parameters
<code> An ISO3166 three-letter country code.
2-14
To Next Page
Loading...
