CLI commands
no dhcp server dns
Reset the domain name server provided to DHCP clients.
dhcp server gateway
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dhcp server gateway <ip address>
Sets the default gateway provided to DHCP clients.
no dhcp server gateway
Reset the default gateway provided to DHCP clients.
dhcp server range
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dhcp server range <start-range> <end-range>
Specify the DHCP server IP address range.
dhcp server subnet
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dhcp server subnet <ip address>/<mask>
Sets the DHCP server subnet.
no dhcp server subnet
Clears the DHCP server subnet.
radius-framed-protocol-attribute
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
radius-framed-protocol-attribute
Include the RADIUS Framed-Protocol attribute in Access Request packets. The value for this
attribute is PPP (1).
no radius-framed-protocol-attribute
Do not include the RADIUS Framed-Protocol attribute in Access Request packets.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
security
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
security (none | wep | 802.1x [wep | static-wep] | wpa (psk | radius) [ v1 | v2
] )
Sets the current wireless security policy.
2-103
To Next Page
Loading...
Need help?
General
