CLI commands
<following-date>
Rule of the form: The first [Weekday] on or after the [Day]th of [Month] at
[Time].
<preceding-date> Rule of the form: The first [Weekday] on or before the [Day]th of [Month]
at [Time].
ntp server
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ntp server <index><host>
Adds a network time server.
Parameters
<index> Index of the time server in the list. Up to 20 time servers are supported.
Time servers are checked in the order that they appear in the list.
<host> DNS name or IP address of the time server.
ntp server failure trap
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ntp server failure trap
Send a trap each time a time server synchronization failed.
no ntp server failure trap
Do not send a trap each time a time server synchronization failed.
config-update automatic
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update automatic
Enables scheduled configuration restore or backup.
no config-update automatic
Disables scheduled configuration restore or backup.
The service controller can automatically download the configuration file from a local or remote
URL (restore). It is also possible to upload the current configuration to a given URL (backup).
Theses operations can be done at preset times.
config-update operation
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update operation (restore | backup)
Sets the type of operation that will take place at the preset time.
config-update time
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-update time <time>
Sets the time of day when the scheduled configuration operation (backup or restore) will take
place.
2-21
To Next Page
Loading...
Need help?
General
