HP MSM7XX - Wmm Advertising; Html Redirection; Local Nas ID; Bandwidth

CLI commands
wmm advertising
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
wmm advertising
Enables WMM information element advertising.
no wmm advertising
Disables WMM information element advertising.
html redirection
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
html redirection
Enables support for HTML logins.
no html redirection
Disables support for HTML logins.
local nas id
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
local nas id <nasid>
Set the NAS Id when only local authentication is configured.
use local nas id
Enables the use of NAS Id when only local authentication is configured.
no use local nas id
Disables the use of NAS Id when only local authentication is configured.
bandwidth
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
bandwidth (very-high | high | normal | low)
Sets the bandwidth level.
bandwidth default rates
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
bandwidth default rates
Enables default bandwidth rates for this VAP (VSC).
no bandwidth default rates
Disables default bandwidth rates for this VAP (VSC).
bandwidth default rates maximum
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
bandwidth default rates maximum <max-tx-rate> <max-rx-rate>
Sets the default maximum transmit and receive rates.
2-100