CLI commands
Syslog context
Path: View > Enable > Controlled Network AP > Controlled Network > Syslog
View > Enable > Controlled Network AP Group > Controlled Network > Syslog
View > Enable > Controlled Network Base Group > Controlled Network > Syslog
Set basic configuration for entity’s logging.
message
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
message (matches | notmatches) <regex>
Use this filter to include log messages. Use a regular expression to define the match criteria for
the log file message field.
no message
Disables filtering of the log file message field.
message
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
message
Enables filtering of the log file message field.
no message
Disables filtering of the log file message field.
process
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
process (matches | notmatches) <string>
Use this filter to include log messages according to their process name.
no process
Disables filtering of the log file by process name.
process
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
process
Enables filtering of the log file by process name.
no process
Disables filtering of the log file by process name.
level
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
level (lower | higher) (debug | info | notice | warning | error | critical |
alert | emergency)
Defines the severity of messages that will be logged.
2-142
To Next Page
Loading...
Need help?
General
