CLI commands
RADIUS remote configuration context
Path: View > Enable > Config > RADIUS remote configuration
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
active
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
active
Use a RADIUS server to fetch configuration information for the public access network.
no active
Do not use a RADIUS for remote configuration.
credentials
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
credentials <username> <password>
Sets the username/password to use for RADIUS configuration.
no credentials
Resets the username/password to use for RADIUS configuration.
interval
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
interval <number>
Sets the intervals at which the service controller will retrieve configuration information from the
RADIUS server.
radius server profile
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
radius server profile <name>
Sets the RADIUS profile to use.
no radius server profile
Do not use a RADIUS profile.
2-86
To Next Page
Loading...
Need help?
General
