CLI commands
http proxy upstream
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
http proxy upstream <string>
Specifies the host:port of the HTTP Proxy Upstream server.
no http proxy upstream
Do not use an HTTP Proxy Upstream server.
https ssl certificate
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
https ssl certificate <url>
Specifies the URL that points to an SSL certificate that will replace the default certificate on the
service controller.
no https ssl certificate
Do not load a custom SSL certificate.
mac-address
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
mac-address <macaddr> [<username>] [<password>]
Adds a MAC address to the local configuration list.
When the MAC authentication option is enabled (in a VAP (VSC) profile), you can define local
configuration settings to validate MAC addresses.
Parameters
macaddr MAC address of the device as 12 hexadecimal numbers, with the values ’a’
to ’f’ in lowercase. For example: 0003520a0f01.
username Username assigned to the device.
password Password assigned to the device.
fail page
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
fail page <url>
Specifies the URL of a new fail page.
no fail page
No new fail page. Use default.
goodbye url
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
goodbye url <url>
Specifies the URL of a goodbye page.
no goodbye url
No goodbye page.
2-57
To Next Page
Loading...
Need help?
General
