HP MSM7XX

CLI commands
no user tracking
Disable capture of usage data.
user tracking destination
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
user tracking destination <host>
Specify to where the detailed syslog packets should be sent.
user tracking filter
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
user tracking filter <filter>
A comma-separated list of filters (username or subnet).
user tracking port
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
user tracking port <number>
Specify to which UDP port capture data should be sent.
persistent user information
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
persistent user information
Save user account information locally .
no persistent user information
Do not save user account information locally.
persistent user information period
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
persistent user information period <number>
Period, in minutes, at which to update user information.
client data tunnel security
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
client data tunnel security (hmac | key)
Specify the security strength of the client data tunnel.
managed map max
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
managed map max <num>
Set the maximum number of APs to manage.
2-47