HP MSM7XX Reference Guide

CLI commands
no dot1x reauth terminate
Disabled this option to block client traffic during re-authentication and only activate traffic again
if authentication succeeds.
dot1x supplicant timeout
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
802.1x supplicant time-out <seconds>
Sets the 802.1X supplicant time-out.
Parameters
<seconds> time-out in seconds.
dynamic key
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dynamic key
Enables dynamic key support for 802.1X and WPA.
no dynamic key
Disables dynamic key support for 802.1X and WPA.
dynamic key interval
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dynamic key interval (5m | 10m | 15m | 30m | 1h | 2h | 4h | 8h | 12h)
Specifies how often (in minutes or hours) that the group (broadcast) key is changed for 802.1X
and WPA.
key chain
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
key chain <name>
Switch to the specified key chain or create a new key chain.
no key chain <name>
Remove the specified key chain.
config-version
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
config-version <string>
Sets a string to identify the user configuration version.
radius-server accounting session
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
radius-server accounting session <number>
Set the maximum number of accounting sessions.
2-43

HP MSM7XX Specifications

General

Brand	HP
Model	MSM7XX
Category	Controller
Language	English