Selecting a Management Interface
Custom Login Banners for the Console and Web Browser Interfaces
ProCurve(config)# show running
Running configuration:
; J9137A Configuration Editor; Created on release #S.14.XX
hostname "ProCurve Switch"
console baud-rate 9600
module 1 type JXXXXA
snmp-server community "public" Operator
vlan 1
name "DEFAULT_VLAN"
untagged 1-5,9-24,Trk2
ip address 15.255.128.86 255.255.248.0
no untagged 6
exit
banner motd “ This is a private system maintained by the
Allied Widget Corporation.
Shows the current banner
Unauthorized use of this system can result in
configuration.
civil and criminal penalites!”
Figure 2-6. The Current Banner Appears in the Switch’s Running-Config File
The next time someone logs onto the switch’s management CLI, the following
appears:
The login screen displays the
configured banner.
Entering a correct password
clears the banner and displays
the CLI prompt.
Figure 2-7. Example of CLI Result of the Login Banner Configuration
If someone uses a Web browser to log in to the switch interface, the following
message appears:
2-11
To Next Page
Loading...
Need help?
General