3. Click Create.
4. Select a service set.
5. Provide the following information and click Create.
• Name: the name that will be used to identify the share in Windows
• Description: a text description of the share (optional)
• Access Protocol: Select NFS
The Network Path is either <IP address>/nas/<sharename> or <Fully Qualified
domain name>/nas/<sharename>.
There is also an option to enable Write Protection. This should only be used if you want to
prevent further backup to the share. If you enable it, any backup jobs currently using that
share will fail.
6. If required, set permissions. Select the share and display the Permissions tab. Click Edit if you
wish to change them. You may set the access permissions for that share for each host in the
list. Check the appropriate box: Read/Write Access, Read-Only Access or No Access.
Configuring NAS shares for NFS 41
To Next Page
Loading...
Need help?
General