HP StoreOnce B6000 Series User Manual

2. Select the CIFS Server tab. The CIFS server name is the same as the name of the HP StoreOnce
Backup System device.
3. If required, click Edit to modify the authentication settings. See below for options.
4. Make changes, as required and click Update. You will be advised that if you update the CIFS
Server settings, any backup or restore jobs in progress for it will fail.
5. Click Continue (or Cancel).
NOTE: When switching authentication modes the user must log out and back into the
Windows client before the new authentication settings will work. Authentication is synchronized
across a couplet.
Authentication settings
There are three authentication options that provide different levels of security for CIFS NAS shares:
None (default), User, and Windows Active Directory. Before configuring the settings, make sure
Configuring NAS targets for CIFS 31

HP StoreOnce B6000 Series Specifications

General

Brand	HP
Model	StoreOnce B6000 Series
Category	Storage
Language	English