7 Housekeeping
The following topics are covered in this section:
• The Housekeeping page (page 85)
• Configuring blackout windows (page 86)
• Pausing housekeeping (page 87)
NOTE: With the current version of the software there are no equivalent CLI commands available
for the tasks described in this section.
The Housekeeping page
Select Housekeeping from the B6200 StoreOnce menu item to display current housekeeping activity
as two graphs: Load and Jobs. There are four tabs that display the following information for the
selected service set: Overall, Libraries, Shares and StoreOnce Catalyst.
Once on the Housekeeping page users with an Admin login can also configure blackout windows
for housekeeping.
IMPORTANT: Housekeeping is an important process in order to maximize the deduplication
efficiency of the appliance and, as such, it is important to ensure that it has enough time to complete.
Running backup, restore, replication and Catalyst Store operations with no break (i.e. 24 hours a
day) will result in housekeeping never being able to complete. This is a complex subject. We
strongly recommend that you read HP StoreOnce Backup Systems best practices for VTL, NAS and
Replication implementations that is available on http:www.hp.com/support/manuals for more
detailed guidance.
Housekeeping graph
Select the required tab to display the Load and Jobs graphs.
• Load graph
The Housekeeping page 85
To Next Page
Loading...
Need help?
General