NOTE: All settings are applied to the HP StoreOnce Backup System — you cannot configure
settings for individual jobs. The Bandwidth Limit windows override the General Limit when the
time specified for the window is active. Outside of Bandwidth Limit windows the General Limit
applies.
4. Click Apply.
Blackout windows
This option allows users with an Admin login to specify times when replication should not occur,
for example during planned maintenance or heavy network traffic. You may configure multiple
blackout windows.
NOTE: This setting relates to the local appliance in its role as a source or target device. No
replication jobs will be started if the Source or Target Appliance for a mapping is in blackout, and
any running jobs for the mapping will be paused.
1. Select the Blackout Windows tab.
2. Click Edit.
3. Check the box next to the required day of the week.
4. The time boxes become editable. Use the spinner menus to select the appropriate hours.
5. Set up as many blackout windows, as required.
70 Replication
To Next Page
Loading...
Need help?
General