8. Install a DIMM in the performance heatsink configuration:
a. Open the DIMM slot latches.
b. Carefully slide the DIMM under the performance heatsink (callout 1).
c. Fully press the DIMM into the slot until the latches snap back into place (callout 2).
9. Install the fan cage.
10. Install the access panel
11. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
12. Connect all peripheral cables to the server.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
To Next Page
Loading...
