16. Install the fan cage.
17. Install the access panel
18. Do one of the following:
Orient the server back in tower mode .
Install the server into the rack .
19. Connect all peripheral cables to the server.
20. Connect each power cord to the server.
21. Connect each power cord to the power source.
22. Power up the server.
ResultsResults
The installation is complete.
HPEHPE NS204i Boot Device NS204i Boot Device option option
Note the following information about the HPE NS204i Boot Device option:
The HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device (NS204i-u) is a PCIe3 x4 custom form-factor module that
includes two hot pluggable 2280 M.2 NVMe SSDs.
This boot device enables the deployed OS to be mirrored through a dedicated hardware RAID 1.
The boot device auto-creates a RAID1 volume during boot, therefore does not require configuration.
This boot device is compatible with the following native OS:
Windows
Linux
VMware
This boot device uses native inbox OS NVMe drivers.
SubtopicsSubtopics
To Next Page
Loading...
