Optical drive bay—SATA optical drive
SubtopicsSubtopics
USB RDX backup system optionUSB RDX backup system option
Optical drive optionOptical drive option
USB RDX backup system optionUSB RDX backup system option
Install an RDX backup system as an inexpensive and portable way of storing data backups. The ruggedized design of this backup
system works especially well in harsh work environments. The backup system consists of two components:
RDX docking station
RDX cartridge
SubtopicsSubtopics
Installing a USB RDX docking stationInstalling a USB RDX docking station
Enable the increased cooling functionEnable the increased cooling function
Installing a USB RDX docking stationInstalling a USB RDX docking station
PrerequisitesPrerequisites
Before you perform this procedure, make sure the following:
The internal USB port is available.
The tertiary riser is installed .
You have the following items available:
RDX supplementary option kit (P49694-B21)—This option kit includes:
RDX USB cable
RDX power Y-cable
Half-height media bay blank
Full-height media bay blank
RDX docking station option – The USB and/or power cables that ship with the drive option will not be used in this server.
T-15 Torx screwdriver
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated
with either a component or a blank.
ProcedureProcedure
1. Remove the front bezel.
2. Power down the server.
3. Remove all power:
-
-
-
-
To Next Page
Loading...
