4. If removed, reinstall the fan blank into bay 1.
5. Perform the post-installation or maintenance steps required by the procedure that necessitates the removal of the fan cage.
Install the access panelInstall the access panel
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
ProcedureProcedure
1. With the access panel latch open, insert the guide pin on the chassis through the hole on the bottom side of the latch.
2. Close the access panel latch.
The access panel slides to the closed position.
To Next Page
Loading...
