HPE ProLiant ML350 Gen11

6. Connect all peripheral cables to the server.
7. Connect each power cord to the server.
8. Connect each power cord to the power source.
9. Power up the server.
Power up the serverPower up the server
About this taskAbout this task
To power up the server, use one of the following methods:
Press the Power On/Standby button.
Use the virtual power button through iLO 6.
Hardware options installationHardware options installation
This chapter provides instructions for installing supported hardware options. To ensure proper server deployment and operation,
Hewlett Packard Enterprise recommends installing only HPE‑validated hardware options. To see the list of validated options for this
server, see the product QuickSpecs on the HPE ProLiant ML350 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014696172https://buy.hpe.com/us/en/p/1014696172
To view the warranty for your server and supported options, see Warranty information.
SubtopicsSubtopics
Server data backupServer data backup
Hardware option installation guidelinesHardware option installation guidelines
Drive optionsDrive options
Power supply optionsPower supply options
Tower-to-rack conversion kitTower-to-rack conversion kit
HPE ProLiant ML350 Gen11 Server User Guide 64