Figure 6-9 Home screen
Table 6-4 Note for the page
No. Item Note
1 Permission status
indicates that you have not logged in to
the system. indicates that you have
logged in to the system as an operator user.
indicates that you have logged in to the
system as an admin user.
2 USB connection status
in the status bar indicates that the USB
ash drive is successfully connected to the
display panel.
3 Diagnostic mode status
in the status bar indicates that the smart
cooling product is in diagnostic mode. Tap the
icon to exit from the diagnostic mode.
4 Buzzer status The buzzer status can be set to On or O. The
icon indicates that the buzzer is on. When
the buzzer is on, it buzzes when an alarm is
generated. When the buzzer is buzzing, you
can tap anywhere on the screen to mute the
buzzer. After the buzzer is muted, it still
buzzes when a new alarm is generated.
indicates that the buzzer is disabled. After the
buzzer is disabled (muted), it does not buzz
when an alarm is generated.
5 Critical alarm
indicates the number of active critical
alarms.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 6 Power-On Commissioning
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 138
To Next Page
Loading...
Need help?
General
