● The controller provides abundant external ports such as RS485 ports, CAN
ports, FE ports, and USB ports that are protected by a security mechanism.
● The device supports communications protocols such as Modbus RTU, Modbus
TCP, and SNMP, facilitating connection to the network management system
(NMS).
● The controller intelligently
identies abnormal parameter settings (incorrect
commands) and rejects them automatically.
● If the indoor temperature uctuates beyond the normal range, an audible and
visible alarm signal is sent automatically.
2.2.3 Main Control Module
Appearance
Figure 2-7 Main control module
(1) Running indicator
(2) Alarm indicator (3) FE_1 port
(4) CAN_IN port (5) RS485/12V port (6) USB port
(7) SW button (8) FE_2 port (9) CAN_OUT port
(10) COM/FE port (11) DP port
Indicators
Indicator
Status Description
Running indicator (RUN) O The unit is shut down.
Blinking green The unit is started.
Alarm indicator (ALM) O There is no alarm, or a
warning or minor alarm
is generated.
Steady red There is a major or
critical alarm.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 2 Product Description
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 22
To Next Page
Loading...
