– The evaporator adopts the inner threaded copper pipe and blue
hydrophilic aluminum foil to prevent water blowing due to condensate
water accumulation and improve heat exchange performance. The V-type
evaporator optimizes the airow pattern and reduces the air resistance.
– The nned-tube evaporator with a high cooling eciency adopts the
synergy
eld principle and computational uid dynamics (CFD) to
optimize the ow path design, which greatly improves the heat exchange
eciency.
– The small diameter evaporator is adopted to enhance the heat exchange
performance, a 10%+ increase in heat exchange eciency compared with
a traditional solution.
– The designed pressure bearing capacity of the heat exchange coil is 1.6
MPa, an excellent pressure bearing capacity.
● EEV
– The
ow regulator uses a miniature controller to control the operation of
the step motor, thereby changing the pass-through area of the valve to
regulate the ow of refrigerant.
– The EEV is equipped with an energy storage unit that prevents slugging
due to migration of refrigerant when the smart cooling product is
powered
o abnormally.
● Oil separator
It is an oil-gas separator which separates the lubricant brought out due to
exhaustion of the compressor and brings back the separated lubricant to the
compressor.
● Sight glass
It allows you to observe the refrigerant
ow and gas content for easy
maintenance and optimization.
● Filter dryer
It absorbs water from the refrigerant pipes and
lters the foreign matter,
which reduces component damage rates and improves operating
eciency
and reliability.
● Air
lter
The G4 air lter is used. The air lter meets the relevant requirements of the
China National Standard GB/T 14295-2008.
● Electric heater
– The positive temperature
coecient (PTC) electric heater automatically
adjusts heating capacity and provides multiple protection measures to
ensure secure and reliable operating.
– The heater features quick start, large heating capacity, and even heating.
● Wet
lm humidier
– The wet lm humidier has low water quality requirements and high
environment adaptability.
– The wet
lm humidier has a simple structure and is easy to remove,
clean, and maintain.
– The wet
lm humidier can quickly start and generate huge
humidication capacity.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 2 Product Description
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 18