Figure 4-47 Using the cassette cleaner
4. Place the ber end face gently against the cleaning area.
5. Drag the
ber end face gently on one cleaning area in the arrow direction
each time. See Figure 4-48. Do it again on the other cleaning area in the
same direction as the
rst time once. See Figure 4-49.
Do not drag the ber end face on the same cleaning area more than once.
Otherwise, the connector can be contaminated or damaged.
Figure 4-48 Dragging the ber end face gently on one cleaning area
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 395
To Next Page
Loading...
