Huawei NetEngine 8000 F User Manual

Table 3-18 Buttons on the NetEngine 8000 F2A-8K36H
Silkscreen Name Description
RST Reset button You can press the RST
button to reset the NE or
restore the factory
defaults of the NE.
The procedure is as
follows:
To reset the NE, press
the RST button and
release it.
To restore factory
settings, press and hold
the RST button. This
operation will clear the
NE database and system
parameter
congurations
and cannot be restored.
Exercise caution when
you perform the
following operations:
1. Press and release the
RST button to restart the
NE.
2. When the STAT
indicator blinks green
(the blinking frequency
is about 250 ms and the
time window is about 15
seconds), press and hold
the RST button.
3. Wait for no longer
than 2 minutes till the
STAT indicators blink
orange (the time
window is 5 seconds).
Then release the RST
button immediately.
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 44

Huawei NetEngine 8000 F Specifications

General

Brand	Huawei
Model	NetEngine 8000 F
Category	Network Router
Language	English