● Connect an external switch to the EPO ports of the UPS. After you turn on the switch in
the case of emergency, the inverter stops and the UPS does not transfer to bypass
mode. In this way, the UPS stops supplying power through the output terminals
immediately.
● The external EPO switch (switch or dry contact signal controlled by a switch) is provided
by the customer.
UPS2000-H-(6 kVA-10 kVA)
User Manual 6 Power-On Commissioning
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 117
To Next Page
Loading...
