5.3.3.3 Installing Lead-Acid Battery Cables
5.3.3.3.1 Installing Power Cables for Lead-Acid Batteries
Procedure
Step 1 Remove the battery terminal covers.
Step 2 Install battery cables.
1. Install battery terminals on the UPS side.
2. Install battery terminals on the battery side.
Step 3 Tighten the two screws at both ends of the battery terminal.
Step 4 Reinstall the covers for all UPS wiring ports.
Figure 5-50 Two parallel UPSs + four battery packs
UPS2000-H-(6 kVA-10 kVA)
User Manual 5 Installation and Cable Connection
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 84
To Next Page
Loading...
