Huawei UPS2000-H - Optional Components; List of Optional Components

NO TE
● Parallel 6 kVA UPSs (lead-acid batteries): The typical conguration is n1 = 2 and n2 = 2.
● Parallel 10 kVA UPSs (lead-acid batteries): The typical conguration is n1 = 2 and n2 =
2.
● Parallel 6 kVA/10 kVA UPSs (lead-acid batteries): The maximum values of n1 and n2 are
both 4.
2.6 Optional Components
2.6.1 List of Optional Components
Table 2-8 List of UPS2000 optional components
Optional
Component
Model Function Remarks
Lead-acid
battery pack
(7 Ah, 20
batteries)
ESS-240V12-7AhBP
VBA04
A battery pack consists of 20
built-in 12 V, 7 Ah/9 Ah VRLA
batteries connected in series and
is congured for the 6 kVA and
10 kVA UPSs. A maximum of four
battery packs can be connected
in parallel.
For details, see
ESS-240V12-(9AhBPVB
A04, 7AhBPVBA04)
Battery Pack Quick
Guide .
Lead-acid
battery pack
(9 Ah, 20
batteries)
ESS-240V12-9AhBP
VBA04
Ambient T/H
sensor
EN3MEIM03C101 Monitors ambient temperature
and humidity.
● Used together with
an SNMP card.
● For details, see
Temperature and
Humidity Sensor
Quick Guide
(02312PBL)
.
SNMP card EN83CTLA Monitors the UPS, provides the
Ethernet networking solution,
and enables ambient
temperature and humidity
detection. The SNMP card can be
used to connect to the NMS.
● The BOM number of
the SNMP card is
02354GJL.
● For details, see
EN83CTLA SNMP
Card User Manual
.
Dry contact
card
EN83CTLC Provides six dry contact outputs
(normal mode, battery mode,
bypass mode, low battery
voltage, bypass backfeed, and
UPS faults), as well as two dry
contact control inputs (one is the
shutdown signal input, and the
other is reserved).
● The BOM number of
the dry contact card
is 02354GJK.
● For details, see
EN83CTLC Dry
Contact Card User
Manual
.
UPS2000-H-(6 kVA-10 kVA)
User Manual 2 Product Overview
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 34