Huawei UPS2000-H - Feedback Protection Connections (with Dry Contract Control); Installing an SNMP Card

5.4.2 Feedback Protection Connections (With Dry Contract
Control)
Figure 5-54 Bypass backfeed protection connections for the 6 kVA/10 kVA models
(single-phase input single-phase output)
Figure 5-55 Bypass backfeed protection connections for the 10 kVA model (three-
phase input single-phase output)
5.5 Installing an SNMP Card
The SNMP cards for UPSs purchased from the supplier can be installed in the
same way. They need to be installed behind the optional card slot cover labeled
INTELLISLOT on the rear panel of the UPS. The actual installation position may
vary with product models.
UPS2000-H-(6 kVA-10 kVA)
User Manual 5 Installation and Cable Connection
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 88