● Ensure that the equipment room provides good heat insulation, and that the
walls and oor are dampproof.
● Install rodent guards at the door of the equipment room to prevent rodents
and insects from entering the room.
● After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
1.5 Mechanical Safety
Ensure that all necessary tools are ready and inspected by a professional
organization. Do not use tools that have signs of scratches or fail to pass the
inspection or whose inspection validity period has expired. Ensure that the tools
are secure and not overloaded.
Before installing equipment in a cabinet, ensure that the cabinet is securely
fastened with a balanced center of gravity. Otherwise, tipping or falling cabinets
may cause bodily injury and equipment damage.
When pulling equipment out of a cabinet, be aware of unstable or heavy objects
in the cabinet to prevent injury.
Do not drill holes into the equipment. Doing so may aect the sealing and
electromagnetic interference shield performance of the equipment and damage
components or cables inside. Metal shavings from drilling may short-circuit boards
inside the equipment.
General Requirements
● Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
for an extended period of time.
● Do not perform operations such as arc welding and cutting on the equipment
without evaluation by the Company.
● Do not install other devices on the top of the equipment without evaluation
by the Company.
UPS2000-H-(6 kVA-10 kVA)
User Manual 1 Safety Information
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 17
To Next Page
Loading...
Need help?
General