Huawei UPS2000-H - Installing Lead-Acid Battery Cables

5.2.3.5 Installing Lead-Acid Battery Cables
Procedure
Step 1 Remove the battery terminal covers.
Step 2 Install battery cables.
1. Install battery terminals on the UPS side.
2. Install battery terminals on the battery side.
Step 3 Tighten the screws at both ends of the battery terminals.
Step 4 Reinstall the covers for the UPS wiring ports.
Figure 5-35 Installing battery cables (two battery packs)
UPS2000-H-(6 kVA-10 kVA)
User Manual 5 Installation and Cable Connection
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 74