Huawei UPS2000-H - What Can I Do if My Phone Frequently Switches between Wifi Networks; How Do I Handle a Device Connection Failure

Procedure
Step 1 You can hold down the reset button on the UPS monitoring device to restore the
preset login account and password. If an SNMP card is congured, only the IP
address of the SNMP card will be restored.
----End
8.5 What Can I Do If My Phone Frequently Switches
Between WiFi Networks?
Procedure
Step 1 On your phone, choose Settings > WLAN.
Step 2 Disable WLAN+.
NO TE
WLAN+ can intelligently select and connect to the optimal network, which will cause
frequent WLAN network switching and aect the normal connection between your phone
and the UPS WLAN network.
----End
8.6 How Do I Handle a Device Connection Failure?
Procedure
Step 1 When the information shown in the following gure is displayed, go to the help
center.
UPS2000-H-(6 kVA-10 kVA)
User Manual 8 FAQs
Issue 03 (2023-08-20) Copyright © Huawei Digital Power Technologies Co., Ltd. 130