Husky Altanium Matrix5 User Manual

Controller Lifting Instructions 7
User Guide v 1.0 — February 2020 Introduction
6. Tighten the ratchet strap.
7. Use the lift device to slowly lift the controller off the ground a few inches.
8. Check the webbed and ratchet straps to make sure the controller will not tilt.
9. Move the controller to the new location.
10. At the new location, slowly lower the controller to the ground.
11. Remove the ratchet straps, cushioned material, and webbed straps from the controller.
Figure 1-4 Protect the Controller Finish

Husky Altanium Matrix5 Specifications

General

Brand	Husky
Model	Altanium Matrix5
Category	Controller
Language	English