Hypertherm HyPerformance Plasma HPR400 User Manual

Maintenance
5-62 HPR400XD Auto Gas – 806160
Preventive maintenance
Hypertherm created a Preventive Maintenance Program (PMP) specifically for your plasma system. The PMP has two
parts: a cleaning and inspection schedule and a component replacement schedule.
See the HPR400XD Auto Gas Preventive Maintenance Program Instruction Manual (808660) for part numbers.
If you have questions about how to maintain your plasma system, contact your OEM or regional Hypertherm Technical
Service team. You can find contact information for each regional office at www.hypertherm.com/global on the “Contact
us” page after choosing your language.
This document refers to your system’s instruction manual. If you do not have your instruction manual, you can find it in
the Hypertherm downloads library:
1. Go to www.hypertherm.com/global
2. Choose your language.
3. Click Downloads library.
4. Enter your instruction manual’s part number in the Part number field.
• HPR400XD Auto Gas Instruction Manual: 806160

Hypertherm HyPerformance Plasma HPR400 Specifications

General

Duty Cycle	100% at 400 A
Cutting Capacity	up to 50 mm (2 in)
Output Current	30-400 A
Input Voltage	200 – 480 V, 3-PH, 50/60 Hz
Gas Supply	Oxygen, Air, Nitrogen