Hypertherm HyPerformance Plasma HPR400 User Manual

Parts List
HPR400XD Auto Gas – 806160 6-15
Torch leads
Part no. Description
228291 2 m (6 ft)
228292 3 m (10 ft)
228293 4.5 m (15 ft)
228294 6 m (20 ft)
228295 7.5 m (25 ft)
228296 10 m (35 ft)
228297 15 m (50 ft)
Part no. Length
123983 3 m (10 ft)
123984 6 m (20 ft)
123985 7.5 m (25 ft)
123986 9 m (30 ft)
123987 12 m (40 ft)
123988 15 m (50 ft)
123989 23 m (75 ft)
123990 30 m (100 ft)
123991 45 m (150 ft)
Ohmic contact wire
Note: The ohmic contact wire is not part of the HPR260XD system. Shown for reference only
(Not part of the HPR400XD system. Shown for reference only.)
Note: A 20 m (65 ft) torch lead is not available for HPR400XD systems

Hypertherm HyPerformance Plasma HPR400 Specifications

General

Duty Cycle	100% at 400 A
Cutting Capacity	up to 50 mm (2 in)
Output Current	30-400 A
Input Voltage	200 – 480 V, 3-PH, 50/60 Hz
Gas Supply	Oxygen, Air, Nitrogen