Hypertherm HyPerformance Plasma HPR400 - Placement of the Cooler

InstallatIon
3-16 HPR400XD Auto Gas – 806160
Placement of the cooler
• Placethecoolerinanareathatisfreeofexcessivemoisture,hasproperventilation,andisrelativelyclean.Allow
1 m (3 ft) of space on all sides of the power supply for ventilation and service.
• Coolingairisdrawninthroughthefrontpanelandisexhaustedthroughtherearoftheunitbyacoolingfan.Do
not place any filter device over the air intake locations, which reduces cooling efficiency and VOIDS
THE WARRANTY.
• Donotplacethecooleronaninclinegreaterthan10°topreventitfromtoppling.
C