158
Chapter 5 Modes And Attributes
Attributes
Figure 135. CST: Accessing Attributes
To access attributes, right-click any item in the Input field (or select multiple
items and right-click). Different attributes are available depending on what
mode is selected (see “Modes” on page 155). In the above example, the “s” in
“Attributes” was right-clicked while in Replace mode. See Figure 135.
These are the different attributes used by the various modes and their
descriptions:
Match
The most common and simplest Attribute. If the specified character(s) match
the datastream, then a replacement occurs if in Replace mode. It is the
default setting.
Don’t Care
Allows certain characters in the datastream to be wild cards; that is, it does
not matter what character it is. If the others match, then the replacement
occurs if in Replace mode.
Don’t Care Except
Allows characters in the datastream to be wild cards, but only if they do not
match the character specified.
To Next Page
Loading...
Need help?
General
