58
Chapter 2 Managing the Database
Security Tab
Figure 41. Printer Properties: Security Tab
User/Supervisor Password: Enter the printer’s password, if appropriate.
The password feature restricts access to certain functions of the PMU. In
User mode, the PMU does not allow the following functions: downloading
files, configurations, or configuration names to the printer; clearing the error
log; and setting passwords. Supervisor mode allows unrestricted access to all
functions of the PMU.
User and Supervisor passwords are only recognized up to 9 characters, and
are displayed as *****, one * for each character typed. Use only printable
characters for passwords. Spaces may be used to separate words. To set up
a password, see “Set Printer Password” on page 127.
Telnet Guest Password: The PMU uses Telnet to read various printer
settings.
IMPORTANT
If you change the Telnet guest password, click OK and then the
(green flag) button (or select Status
Update Status).
Telnet Root Password: The PMU uses Telnet to update various printer
settings.
IMPORTANT
If you change the Telnet root password, click OK and then the
(green flag) button (or select Status
Update Status).
To Next Page
Loading...
Need help?
General
