Changing Configurations
69
Changing Configurations
Configuration settings in the Configuration Editor can be changed two ways:
• make the changes directly on the menu tree
• use the Menu Editor
NOTE: Normally, the factory default configuration cannot be changed.
However, you can enable modification of the factory configuration.
Select Edit
Enable Factory Edit. It is strongly recommended that
you do
not
modify the factory default configuration. If you choose to
modify the factory configuration, you should first upload it from the
printer, and then save it. This way, you will have a backup copy of the
factory configuration. To disable modification of the factory
configuration, select Edit
Disable Factory Edit.
Making Changes on Menu Tree
1. Using the Displayed Configuration menu at the bottom of the window,
click the drop-down arrow to choose the configuration to change.
2. Expand the submenus until the configuration setting you want to change
displays.
3. Select the menu item you want to change. A selection box surrounds your
choice. See Figure 52.
Figure 52. Selecting a Menu Item
4. Double-click an item to open the Menu Editor (page 70) for that item, or
use the < and > keys to toggle through the available options. See
Figure 53. (You may change these keys in the printer database window:
select File
Preferences, then click the Configuration Editor tab.
See page 27.)
Figure 53. Toggling Through The Available Options
To Next Page
Loading...
Need help?
General
